Switch PoE, 5 portowy gigabit 10/100/1000Mbps ATTE xPoE-5-50-OF

PoE switch, 5-port gigabit 10/100/1000Mbps (2xPoE 100W + 3xPoE 70W), PoE power supply on all pairs, electronic fuses, built-in module, without power supply, type xPoE-5-50-OFKey features and functions:

• enables the construction of a 100W PoE "bus" by cascading switches (one xPoE-5-50 powers another)
• 5 Gigabit 10/100/1000Mbps ports
• PoE power supply on all pairs = lower voltage drops (energy losses) on the PoE bus
• ability to power up to 5 PoE 802.3at / af / bt receivers*
• ability to power all switches and extenders from the ATTE xPoE series
• independent electronic fuses for each PoE channel (auto return)
• ability to turn off power on selected PoE ports
• easy and quick commissioning without the need to configure parameters
• very low power consumption (

xPoE-5-50-OFwas designed to create distributed IP CCTV systems with a central power supply point. The unique design allows for constructionmasterful(branch) of power supplyPoEwith a large power budget (do 100W) and high throughput (Gigabit Ethernet). Electronic protection of PoE outputs ensures continuous operation of the entire system in the event of a short circuit or overload of individual power supply branches, and automatic voltage recovery after the failure disappears. The device is used in systems requiring increased network bandwidth, such as CCTV monitoring4K Ultra HD.

OF (Open Frame) constructionallows the device to be installed in any housing, but the most convenient way of installation is dedicated ABOX series housings and mounting plates equipped with special holes in a 10.8 mm pitch. It is compatible with the spacing of mounting holes of built-in modules. The system solution allows for vertical or horizontal installation of selected devices in any perforated part of the housing or mounting plate.Attention!

• since PoE power is supplied on all twisted pairs, special attention should be paid to whether the receiver is compatible. We recommend power supplyonlyother ATTE devices (switches, extenders, adapters) and standardized PoE receivers (802.3af/at/bt) in which power can be supplied in any pairs and with any polarization.
• not suitablefor direct power supply of receiversPASSIVE PoE 24VDCsuch as WiFi antennas (e.g. Mikrotik, Ubiquiti). Use a PoE adapter to power PASSIVE PoE 24VDC devices