3-port PoE switch 10/100Mbps, extender (1xPoE IN 802.3at/af + 2xPoE OUT), powered by PoE (max 40W), sequential start PoE OUT
A set of active converters for Ethernet transmission
€725.25
Tax included
3-port PoE switch 10/100Mbps, extender (1xPoE IN 802.3at/af + 2xPoE OUT), powered by PoE (max 40W), sequential start PoE OUT
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Set of active converters for Ethernet and PoE transmission via coaxial, 1 channel 100Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive (xCOAX3-CAM), range up to 500m, RJ45/BNC_F connectors
ALSO AVAILABLE VERSION DEDICATED FOR INSTALLATION IN THE CAMERA BASE
Key features and functions:
- transmission range via coaxial cable to500mwith speed100Mbps
- interference resistance and functionwatchdogin the COAX track
- Possibility of power supply from the switchPoE 802.3at/afthe PoE PASSIVE (xCOAX3-SW)
- possibility of powering PoE 802.3at/af or PoE PASSIVE receivers
- do30Wtotal power in the entire power supply path
- very low power consumption -1,35Wthe whole track
- small module sizes
- clear, optical indication of power supply and data transmission status
- easy and quick commissioning without the need to configure parameters
The set includes:
- xCOAX3-SW
- xCOAX3-CAM
xCOAX3-SETis a set of active converters for data transmission from the Ethernet network and PoE power supply via a typical coaxial cable used in analog monitoring. The devices enable the installation of PoE IP cameras in places where replacing the existing coaxial cabling is impossible or unprofitable. ModulexCOAX3-SWpowered from any PoE switch (RJ45 port) and via a coaxial cable, enables bidirectional network communication and module power supplyxCOAX3-CAM. The maximum length of the coaxial cable is 500m. A camera or other PoE receiver can be connected to the module's RJ45 portxCOAX-CAMat the end of the line.
Polycarbonate housingis a well-thought-out solution that ensures insulation and the smallest possible dimensions of the device. The small size provides wider options for selecting the installation location.
Technical data:
| LAN ports | 1 port RJ45 100Mbps |
| Connectors | RJ-45 and BNC (female) |
| Port 1/2 functions | xCOAX3-SW PoE INPUT (track power supply):
|
| Port 2/2 functions | xCOAX3-CAM PoE OUTPUT (power supply for PoE receivers):
|
| Work signaling | LED RJ45 port (yellow) - power supply present LED RJ45 port (green) - link and data transmission in the LAN path LED at the BNC connector (green) - link and data transmission in the COAX path |
| Supply voltage | xCOAX3-SW: 44 ... 56 VDC |
| Output voltage | xCOAX3-CAM (for PoE devices): Vout = Vin (44 ... 56 VDC) |
| Power consumption | 1.35 W (entire track) |
| Length of coaxial cable | 500m - distance xCOAX3-SW to xCOAX3-CAM |
| Length of the network cable | 100m - distance SWITCH PoE to xCOAX-SW 100m - distance xCOAX3-CAM to CAMERA |
| Security | LAN and BNC ports: Overvoltage protection xCOAX3-SW: 0.7A short circuit protection with auto recovery |
| Housing design | Polycarbonate |
| Degree of protection | IP20 |
| Operating temperature | -25°C...+65°C |
| Dimensions | xCOAX3-SW - 106 x 24 x 21,5mm xCOAX3-CAM - 106 x 24 x 21,5mm |
| Libra | xCOAX3-SW - 0,03 kg xCOAX3-CAM - 0,03 kg |
No customer reviews for the moment.
Related Products ( 16 other products in the same category )
