6-port ATTE XPOE-6-11-S3 PoE switch

6-port PoE switch 10/100Mbps (5xPoE + 1xUplink), electronic fuses, Long Range mode, in ABOX-S3 external housing, without power supply, type xPoE-6-11-S3

Key features and functions:

• possibility of powering 5 PoE 802.3at/af or PASSIVE receivers
• possibility of data transmission over 280m (in Long Range mode)
• electronic fuse independently for each PoE channel (auto return)
• ability to turn off power on selected PoE ports
• clear optical indication of power supply and data transmission status
• wide input voltage range (10...56VDC)
• output voltage = input voltage
• up to 70W of power on the LAN_5 PoE IN/OUT port
• up to 40W of power on other PoE ports
• powered by a screw connector (Vin) or from another PoE PASSIVE switch (PoE IN/OUT port)
• cascade power supply option - one xPoE powers the next (PoE IN/OUT port)
• easy and quick commissioning without the need to configure parameters
• very low power consumption (
• installation of modules in any perforated part of the mounting plate (raster system)
• Possibility to keep spare cables inside the housing
• cable entry through rubber plugs installed in the housing: 2x29mm
• The set includes 2 brackets enabling installation of the housing without compromising the IP55 protection level

xPoE-6-11-S3was designed as a universal PoE network switch dedicated to IP CCTV systems. Electronic protection of PoE outputs ensures continuous operation of the entire system in the event of a short circuit or overload of individual power supply branches, and automatic voltage recovery after the failure disappears. "Long Range" mode allows you to:increasing the transmission range to 280musing standard UTP twisted-pair cable.

Unmanageable switche i extendery PoEare designed to work with IP cameras and other network devices powered by the PoE 802.3at/af and PoE PASSIVE standards.

ABOX series external enclosuresare a convenient solution to the problem of protecting devices and cable connections installed outdoors. High-quality plastic ensures resistance to UV radiation and other unfavorable atmospheric factors. The models available in the offer are equipped with a mounting plate with special holes in a 10.8 mm pitch. It is compatible with the spacing of mounting holes of built-in modules. The system solution allows for vertical or horizontal installation of selected devices in any perforated part of the mounting plate.