230V relay controlled by remote controls and RF433 Mhz devices
Possibility to turn the power on and off using the remote control or manually using a button (the RF433Mhz remote control is not part of the offer, look for suitable remote controls in our other offers or buy them in the proposed sets.)
Key advantages:
Precise RF433Mhz receiver
Ability to learn up to 12 radio codes.
The housing does not need to be opened for installation, and also has places for screws to be attached to the wall.
3 operating modes: momentary (monostable), switch (bistable), locked (Remote control code A turns on the relay, Remote control code B turns off the relay)
230V power supply connection diagram
Pairing instructions:
1. Momentary Mode (monostable) – As long as you hold the button, the relay will be on
Press the receiver button 1 time, the red LED will light up. Press the button on the remote control you want to associate with the transmitter. The red diode on the relay will blink, which means that the code has been received and saved.
2. Switch mode (bistable) – Press the remote control button, the relay will turn on, press the remote control button again, the relay will turn off.
Press the receiver button 2 times, the red LED will light up. Press the button on the remote control you want to associate with the transmitter. The red diode on the relay will blink, which means that the code has been received and saved.
3. Locked mode – Code A turns the relay on, code B turns the relay off.
(Note: When configuring locked mode, you need a remote control with a minimum of 2 buttons
Press the receiver button 3 times, the red LED will light up. Press the A – On button on the remote control that you want to associate with the relay. The red diode on the relay will blink, which means that the code has been received and saved. Then press the remote control button B – Turn off,
Attention:
The smart switch can only store 12 radio codes. If you have old codes memorized and are trying to upload new ones, make sure to delete the old ones. To delete old codes, press the pairing button 8 times.
Reviews
There are no reviews yet.