Touch surface-mounted remote control, KT ZigBee 3.0 series TUYA – scene and automation remote control
Wireless surface-mounted ZigBee switch/remote control
Despite having 3 buttons, the device can have up to 9 assigned automations.
Each automation can be started by pressing one, two or long-pressing the button.
The device runs on batteries (included), in normal use the battery should last for about 1-2 years.
The button is made of high-quality plastic. After drying, the green LED lights up slightly.
Attention! For proper operation of the device, a Zigbee 3.0 TUYA gateway is required, available in our offer:
Key advantages:
Aesthetic appearance, can be placed anywhere in the house.
Simple interface for setting up automation from the Tuya app.
You can define 3 different events for each button.
Multiple conditions (if) and events (then) assigned to one command.
Remote On/Off – Turn your lights on and off from anywhere
Creating a sequence of events with one button.
Classic, elegant look, high quality workmanship
LED backlight for confirmation of pressing
Basics of the ZigBee protocol.
The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings
ZigBee connectivity is MESH connectivity, which means that each ZigBee device acts as a relay for other devices. If a remote sensor does not have communication with the ZigBee gateway, it is sufficient that it has radio communication with another ZigBee device that has communication with the gateway. The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection.
ZigBee devices and sensors consume very little energy, which gives a long battery life.
On a WiFi network with 25 devices you will start to experience network issues. You can easily add over 50 devices to the ZigBee hub.
Devices using the ZigBee protocol connect to the control panel in 0.2 seconds when their status changes. WiFi devices take about 5 seconds to connect to the WiFi network after a status change. ZigBee devices have a huge advantage when it comes to automating smart rules.
Most configured ZigBee device automations are performed on the on-premises gateway, not in the cloud. Typical rule: if motion is detected (PIR sensor), turn on the light. The execution time is approximately 0.5 seconds. The execution time of the same rule on WiFi devices is approximately 3-7 seconds.
The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved months ago.
On the remote controls, there are delicate dots above the LED indicating the remote control’s channel number. The unfilled dots inside indicate the pairing button with the TUYA ZigBee 3.0 gateway.
The package contains:
3 channel panel
3M double-sided tape
battery
user manual
Product code: PNTZ53
Reviews
There are no reviews yet.