OXT Smart Radar Presence and Brightness Sensor ZigBee TUYA
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
OXT | Radar Sensor | Presence Brightness
230V | ZigBee | TUYA
✅ Doppler radar actively detects presence in the environment
This ensures the light will never turn off during a shower – the sensor detects even the smallest movements, such as breathing, while you remain still.
✅ Built-in brightness sensor
Enables automation scenarios based on ambient light levels.
✅ Full compatibility with Home Assistant ZigBee2MQTT
Our offer includes screenshots showing the device in action within HA.
▶️ Presence Detection Features
- ✅True presence detection:Detects minimal movement such as breathing, even when sitting still.
- ✅Two detection zones:Near (micro-movements), Far (longer range, penetrating obstacles like glass or doors).
- ✅Detection through glass:The light won’t turn off if you are inside a shower cabin.
- ✅Presence history:View logs of previous detection events.
▶️ Control Automation
- ✅Lighting control:Configure automations directly in the app.
- ✅Advanced automations:Based on brightness and presence state (near, far).
- ✅Schedules:Set individual scenarios for specific days and times.
▶️ Light Adjustment
- ✅Automatic brightness adjustment:Reacts to real-time light intensity in the room.
▶️ Configuration Options
- ✅Motion detection sensitivity:0–9
- ✅Detection off-delay:10 s – 1500 s
- ✅Post-detection delay:0 s – 10 s
- ✅Minimum detection distance:0 m – 9.5 m
- ✅Maximum detection distance:0 m – 9.5 m
▶️ Compatibility Integrations
- ✅Home Assistant ZigBee2MQTT:Fully compatible with the system.
ℹ️ Additional Information
- ✅Updated version:Improved reporting and notification frequency compared to the previous model.
- ✅ZigBee TUYA gateway required:Necessary for proper operation.
- ✅Configuration:After installation, configure the sensor in the app; settings depend on the mounting location.
▶️ Build Your Own Smart Home
No need for wall chiseling or wiring!
The device works fully wirelessly, communicating with other system components in one environment (the so-called cloud).
✅Easy integration– connect and control lights, devices, or sensors without additional wiring.
✅Advanced scenarios– create automation between devices, e.g. alarms, alerts, or smart home routines.
✅App control– full system management from one place, using any mobile device.
✅Flexibility expandability– the system depends only on your creativity; our range of compatible devices is constantly growing.
ℹ️ You can optionally set the minimum and maximum detection distance for the target alarm zone from 0.1 m to 9.5 m.
ℹ️ Home Assistant App Screenshots:
ℹ️ Basics of the ZigBee Protocol:
The ZigBee protocol operates on the well-propagating2.4 GHzfrequency, ideal for indoor use.
ZigBee uses a MESH connection, meaningeach ZigBee device with full power (L+N) acts as a signal repeaterfor others.If a distant sensor cannot reach the gateway directly, it can connect through another powered ZigBee device(up to 3 devices in chain). This ensures reliability and stable connections.
ZigBee devicescommunicate with the hub in 0.2 secondsafter state changes, while WiFi requires about 5 seconds. This gives ZigBee a huge advantage for smart automation.
WithWiFi, issues begin to appear at around25 devices ❌
With aZigBee gateway, you can easily add50+ devices ✔️
ZigBee gateways and devices allowlong-term storage of parameters and device historysuch as door openings, temperatures, and motion detection logs saved months back.
ZigBee communicationconsumes very little energy, ensuringlong battery lifefor battery-powered devices.
ℹ️ The prepared hole for placing the sensor should be 50 mm in diameter
ℹ️ Specification:
▶️ Connectivity Power
- Communication protocol:ZigBee 3.0
- Power supply:AND 230 V
- Operating frequency:5800 MHz
▶️ Detection Measurement
- Detection angle:120° (ceiling-mounted)
- Detection range:0–9.5 m
- Illuminance measurement range:0–2000 lux
▶️ Build Protection
- Protection rating:IP20
- Dimensions:39 × 62 × 62 mm
ℹ️ Included in the box:
- OXT Presence Brightness Radar Sensor 230 V ZigBee
- Ceiling mounting bracket
- User manual
ℹ️ Product code: T160
Data sheet
- APP
- Home Assistant
Smarteg Smart Life
ZHA
Zigbee2mqtt - Protocol
- BLE
HTTP
HTTPS
LIN
MQTT
wifi
Zigbee - Voltage
- 240V
- IP Class
- IP20
No customer reviews for the moment.


