Multi sensor 4w1 PIR. will. lux ZigBee TUYA

➡️ This is a versatile device that collects information on air humidity, light intensity, temperature and motion detection. These four functions allow you to fully automate your home. The device allows you to monitor four key parameters to create a comfortable and intelligent home.

✅ Perfect for the bathroom, monitoring all the most important parameters.

⭐ Main advantages ⭐

✅ 4 sensors in one device:

• PIR motion sensor
• temperature sensor
• humidity sensor
• brightness sensor

✅Data is provided on an ongoing and historical basis in the application

✅ The device works very well with HA on zigbee2mqtt!

✅ Notification frequency time setting (0 - 1440 minutes)

✅ Motion detection sensitivity setting (low, medium, high)

✅ Setting the time after which, e.g., the light should be turned off (0s, 30s, 60s, 120s, 240s)

✅ Possibility to turn off the PIR sensor

✅ Possibility to calibrate temperature, brightness and humidity values

✅ Possibility to turn off the diode on the device

✅ The set includes a magnetic wall mount

✅ Battery powered or USB powered

✅ Accurate battery data available in the application

✅Aesthetic appearance and easy installation

✅ Possibility to purchase a mounting bracket (ceiling) available in our offer (check in the connected products)

ℹ️ ATTENTION! For proper operation of the product, an additional ZigBee gateway available in our offer is needed

✔️ Two power modes

This is a very convenient feature of the 4-in-1 sensor because it gives the user flexibility in choosing the power supply method. Whether you use batteries or a power cable, the sensor will continue to function reliably. Thanks to this, you can adjust the power supply to your preferences, ensuring continuous and reliable operation of the device.

ℹ️ Note. Fast information refresh time should be used with USB power connection.Please note that when the refresh rate is set very frequently (less than 30 seconds), the battery consumes very quickly.

✔️ Application

The sensor is a perfect solution for those who want to have smart sensors in their home, but at the same time want them to be virtually invisible. Thanks to the additional holder (not included), you can easily mount the multisensor on a wall or suspended ceiling. This means you can enjoy intelligent functions and monitoring parameters in your home without disturbing the aesthetics of the interior. The additional casing provides an elegant appearance while allowing full use of the functionality.

ℹ️ Screenshots from the TUYA application

Basics of the ZigBee protocol:

• The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings
• ZigBee connectivity is MESH connectivity, which means that each ZigBee device with full L+N power works as a signal amplifier for other devices. If a remote sensor does not have communication with the ZigBee gateway, it is enough that it has radio communication with another ZigBee device with full L+N power that has communication with the gateway (up to a maximum of 3 devices). The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection
• Devices using the ZigBee protocol connect to the control panel in 0.2 seconds in the event of a state change, and WiFi needs about 5 seconds to connect to the network after a state change. ZigBee devices have a huge advantage when it comes to automating smart rules
• On a WiFi network with 25 devices you will start to experience network issues. You can easily add over 50 devices to the ZigBee hub
• The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved months ago
• ZigBee communication consumes very little energy, which gives a long battery life.

ℹ️ Specification:

• App:TUYA Smart / SmartLife
• Communication:ZigBee 3.0
• Power supply:2x baterie CR123A 3V lub micro USB 5V 750mA(batteries and ceiling adapter not included)
• Maximum RF Output Power:6 ± 1dBm
• Wireless range:
• Detection Angle:120 °
• Humidity detection range:20-80% RH
• Temperature detection range:-10 - + 60 ° C
• Lighting detection range:0 - 1000 lux
• Battery life:up to 2 years(depending on refresh time setting)
• Fixing: screws or 3M adhesive tape
• Installation height:2.2 - 2.8 m, recommended height 2.5 m
• Working temperature:-0°C do +40°C
• Operating humidity:maximum 85%
• Degree of protection:IP20
• Dimensions:55 x 55 x 35 mm

ℹ️ The set includes:

☑️ PIR presence motion sensor

☑️ Kabel USB

☑️ Mounting bracket

☑️ 2 x screws

☑️ Adjustable magnetic stand

☑️ Double-sided tape

☑️ Instructions

Product code: T650