4-channel RF 433.92 MHz fixed code copying remote control
The remote control allows you to copy codes from another 433 MHz RF remote control with fixed codes.
If you have a remote control for 433.92 MHz fixed codes, We can copy it for the help of our pilot coping. included)
High quality of workmanship
4 programmable buttons
Solid, thick and durable housing
Easily and quickly copies the signal from 433.92 MHz remote controls on a fixed code
Range up to 100m ( open space)
Attention!
Before purchasing, please make sure that your original remote control works on the same frequency and fixed code. Frequency and encoding are two different parameters. PLEASE PAY ATTENTION TO THE PERMANENT CODE. CANNOT BE VARIABLE (DYNAMIC) IN THE ORIGINAL REMOTE. Copying instructions: Place the signal source (transmitter, another RF433 remote control) right next to the copying remote control. Ideally, the devices will have their housings touching each other.
Press buttons A and B at the same time to delete the previously saved codes.
Press the button you want to program and keep it pressed all the time, during this time, press the button of the remote control whose code you want to copy (source of the RF 433 code). Release the remote control button after you notice the diode on the remote control is copied. …cym.
The code has been saved. Repeat for all buttons.
Each button can remember one signal. If the remote control has not signaled that the signal has been copied, please repeat the operation several times, trying to approach the remote controls from different sides. Copying is aided by touching the metal elements of both remote controls. A weak battery in the copied remote control may make copying the signal impossible or difficult.
ATTENTION! If copying the signal still fails, make sure that the remote control from which the signal is copied operates on the same parameters, i.e. frequency 433.92 MHz and the code is constant ym. If the copied remote control operates on a different frequency or variable code (dynamically variable), it is not possible to copy the signal. Information about the frequency and code can be found on the Internet by searching for the make and model of the remote control, control unit, gateway, etc. Specifications:
Power supply: CR2032 battery (included)
Copying: Fixed codes 433 .92 MHz
Frequency: 433.92 MHz
Dimensions: 55 – 28 – 14 mm
Number of channels: 4
Range: 30 – 100 m (open space) nProduct code: PL041
Reviews
There are no reviews yet.