ZigBee 3.0 temperature and humidity sensor TUYA SMART
This offer applies to: Tuya Smart ZigBee 3.0 temperature and humidity sensor
The latest generation ZigBee 3.0 protocol together with the Tuya Smart application allows you to create a truly smart home.
The ZigBee temperature and humidity sensor offers precise temperature and humidity measurements, saving this data in memory for a year. Divided into days with hours, months, year.
ZigBee 3.0 sensors ensure fast connectivity to your ZigBee gateway when status changes. ZigBee Mesh, greater automation possibilities, local memory for parameters and devices.
Discover completely new possibilities of the TUYA Smart Life system
Unlike WiFi devices, automations occur locally on your gateway, not in the cloud, giving you a huge advantage in execution time and functionality.
Attention! This device requires a ZigBee 3.0 TUYA gateway available in our offer.
Adding a sensor to the TUYA ZigBee gateway and creating automation is equally simple and intuitive.
The measurement accuracy reaches 0.01 degrees.
Automation example:
> If the temperature is higher than 22.75 degrees
> Then send a notification and turn off the heaters.
Automation rules can be configured based on:
Humidity: less – equal – greater
Battery status
Temperature: less – equal – greater
Basics of the ZigBee protocol.
The ZigBee protocol operates on the 2.4 GHz frequency, which propagates well in buildings
ZigBee connectivity is MESH connectivity, which means that each ZigBee device acts as a relay for other devices. If a remote sensor does not have communication with the ZigBee Gateway, it is sufficient that it has radio communication with another ZigBee device that has communication with the gateway. The devices work in a mesh chain of connections, which ensures reliability and certainty of the connection.
ZigBee devices and sensors consume very little energy, which gives a long battery life.
Devices using the ZigBee protocol connect to the control panel in 0.2 seconds when the state changes. Wifi devices take about 5 seconds to connect to the Wifi network after a state change. ZigBee devices have a huge advantage when it comes to automating smart rules.
Most configured ZigBee device automations are performed on the on-premises gateway, not in the cloud. Typical rule: if motion is detected (PIR sensor), turn on the light. The execution time is approximately 0.5 seconds.
The execution time of the same rule on WiFi devices is approximately 3-7 seconds.
The ZigBee gateway and ZigBee devices allow for much wider and longer storage of parameter data and device history. Door opening history, temperature history, motion detection history saved months ago.
Specification:
Connectivity protocol: ZigBee 3.0
Compatibility with the application: TUYA SMART LIFE
Measurement: Temperature and humidity
Dimensions: 40×40.3×10.6mm
Battery: CR2032
Temperature accuracy: 0.3°C
Humidity Accuracy: 3%
Standby current consumption: <4.5uA
Operating current consumption: <5mA
Included:
Zigbee 3.0 TUYA SMART temperature and humidity sensor
CR2032 battery
Packaging
Instructions for pairing with the application in Polish.
Product code: SNTZ031
Reviews
There are no reviews yet.