Sonoff DC Wifi Controller
Power supply – 5v Micro USB or 7-32V AC/DC with support for RF433.92MHz ev 1525 remote controls Fixed codes
Remote control sold separately. Look for our other offers.
Control via the eWelink application or after uploading alternative software using other methods.
3 operating modes: monostable (pulse), bistable (self-locking), with time delay.
Application:
The switch is perfect for controlling lighting, gates, actuators, door control, button signaling, computer control, access control, voltage-free control – heating furnaces, control of 230V devices
Works with Google Home, Amazon Alexa, IFTTT
Connect it to your gate module in place of the manual button contacts and you have a smartphone-controlled garage door.
The device is intended to control other electronics and does not have a housing.
Dimensions: 71mm * 41mm * 18mm
Own power consumption: <1W
Standby current: 80mA
RF433.92 MHz receiver, fixed codes EV1527
Input voltages: 5V DC or 5V/7-32V DC
LEDs 3 LEDs that indicate working mode, wifi status, relay on/off status respectively.
Operating conditions -30°C to 75°C humidity less than 95%
2.4 GHz Wi-Fi standard
WEP/WPA-PSK/WPA2-PSK security mechanisms
40 x 70 x 17 mm
NC: Normally closed relay – normally closed
COM: Common
NO: Normal open – normally open
Full support for the eWelink application!
Connect this device to your Sonoff ecosystem.
Possibility to select the channel state after power recovery – Enabled, Disabled, Store
Possibility to set a time loop, stopwatch in the application. After starting, the switch will automatically turn off after a specified period of 1 min-99 h
Setting a schedule for up to 8 events per day
Setting the time loop
Possibility to set automation rules in the eWelink software. Create complex rules that bind multiple devices in the application.
Pairing with the eWelink application is the same as in the case of Sonoff devices. Our detailed pairing guide will give you step-by-step instructions.
Modes of operation:
Jog (default) – momentary Monostable mode, press the remote control button, the relay will turn on. Release the remote control button and the switch will turn off. A mode not supported by the application operates monostable in the application – Impulse.
Self-locking – Bistable mode allows you to turn on devices that remain on until they are turned off by pressing the remote control/app again. Classic relay operation mode.
Set contains:
DC 1CH Wifi + RF433MHz Controller
User manual in Polish
Sales document
Packaging
Product code: SE167R
Reviews
There are no reviews yet.