Project Support for DIY Enthusiasts
You're already planning your smart home or wiring yourself — but you want someone experienced to check your BOM, circuit list, or a specific solution before you start installing. This is targeted support, not a full design from scratch.
How the support works
Send us what you have
Share your device/BOM list, circuit or cable list, a sketch, or the specific question that's on your mind.
We review it
Our engineer checks your plan — gaps, conflicts between electrical and low-voltage/smart-home systems, and spots that could cause trouble during installation.
You get feedback
Concrete comments in writing or a short consultation call — what to fix, where spare capacity is missing, what doesn't meet the standards.
Optional follow-up
Updated your plan and want a second look, or have new questions? We can continue — scope and timeline always depend on how much is left to review.
Why get a professional check
Fresh eyes on your work
Not a new project from scratch — a professional review of what you've already worked out, so mistakes surface on paper, not on site.
Precise scope
We review exactly what you send — you don't pay for full design when you only need a check.
Less rework
Clear feedback before installation means fewer mistakes and less redoing on site.
Coordination check
We look at whether electrical, data cabling (KNX, UTP) and smart-home devices are working against each other.
Standards compliance
We flag where your plan doesn't meet LVS/IEC 60364 requirements, so you can fix it in time.
Documents stay yours
Lists and diagrams are editable (PDF/DWG, spreadsheet) — keep working on them yourself or hand them to your electrician.
What we can review
Pick what you need most right now — we always agree on the exact scope before starting.
- {'t': 'Device/BOM list review', 'd': 'Whether your chosen devices fit together and match your plan.'}
- {'t': 'Circuit and cable list check', 'd': 'Whether grouping, cable sizing and protection are logical and safe.'}
- {'t': 'Panel layout check', 'd': "Whether there's spare capacity and the layout is practical to install."}
- {'t': 'Smart-home topology check', 'd': 'If automation is involved — whether scenarios and connections are consistent.'}
- {'t': 'Consultation on a specific question', 'd': 'Not sure about one particular solution? We can discuss it separately.'}
Frequently asked questions
How much does this support cost?
Price always depends on scope — a short consultation costs differently than a full list review. Request a quote and we'll give you a specific price for your case.
How is this different from full electrical design service?
This is the lighter option — you've already done most of the planning, and we review it or advise on a specific question. If you want a professional to prepare the whole project from scratch, that's our 'Electrical Project Preparation' page.
What do I need to prepare before contacting you?
Send whatever you already have — even an informal sketch, a list, or just a specific question. Finished documentation isn't required.
Will you also install or connect the devices?
No — this service is about checking your plan and documentation. Final connection, installation and sign-off is always done by a certified electrician per national wiring rules.
Can I also use the PanelCraft Builder Studio?
Yes, the configurator is a handy self-service tool for visualization and planning that works alongside our consultation — it complements, not replaces, a professional review.
Ready for a review?
Send us your device list, circuit diagram, or question — request a quote and our engineer will reply with a specific scope and price.