Can you install Loxone yourself?
Loxone Config and system planning are open to any enthusiast, but Tree cable installation and first setup are usually done by a certified Loxone Partner. Here's the honest picture of what you can and can't do on your own.
What you can do yourself
Download Loxone Config
A free PC application for configuring the system — visual programming with function blocks. Install it and start exploring the interface.
Try the simulator
Config includes a simulation mode where you can build logic and test scenarios without any real hardware.
Plan your home
Sketch your room layout, map out functions per room, and think through lighting, blinds, or heating — work you can genuinely do yourself, right now.
Talk to a Loxone Partner
Once your plan is ready, a certified partner installs the Tree cabling and handles first configuration — so the system runs reliably and stays under warranty.
Why Loxone isn't a typical DIY gadget
Tree bus carries power and data together
A single 4-wire cable powers devices and carries data in a tree topology — not a star layout like KNX.
Miniserver
The central DIN-rail controller — automation logic runs locally, without relying on the cloud for core functions.
Tree bus
A proprietary bus with tree topology — simpler cabling than a star layout, but it needs careful planning.
Air wireless line
Battery-powered sensors and switches with no extra cabling — handy for renovations or later expansion.
Link module bus
The internal bus connecting extension modules to the Miniserver — the backbone inside the cabinet.
Closed vs open platform
Loxone is a manufacturer-centric system with its own bus; KNX is an open international standard with devices from many manufacturers. The choice affects how freely you can mix brands.
What a DIY start includes
This isn't a ready-made box off the shelf — it's a way to start on the right foot.
- Loxone Config software (free download)
- Built-in simulation mode for learning
- Access to documentation and the function block library
- Help finding a certified Loxone Partner for installation
- A pre-purchase chat to point you in the right direction
Frequently asked questions
Can you install Loxone completely on your own, without a partner?
The Config software and system planning — yes. But most of the hardware, especially Tree cabling and first configuration, is done by a certified Loxone Partner. That's standard practice for the system, not a limitation we impose.
What is Loxone Config and does it cost anything?
Config is a free PC application for configuring the system, using visual programming with function blocks. Anyone can download and try it, even without owning any hardware yet.
What's the difference between Loxone Tree, Air, and Link?
Tree is the main wired bus — a single cable carries power and data in a tree topology. Air is the wireless product line for battery-powered devices. Link is the internal bus connecting extension modules to the Miniserver inside the cabinet.
Why can't I just order Loxone like a regular smart bulb?
Loxone is a system, not a single device — it needs planning, correct cabling, and configuration, which is mostly handled by a certified partner. That's what keeps the system reliable long-term.
Is Loxone the same as KNX?
No. Loxone is a closed, manufacturer-centric platform with its own bus, while KNX is an open international standard with devices from many manufacturers. Each approach has its own advantages depending on the project.
Want to start the right way?
Browse Loxone products in our shop, or get in touch — we'll help you connect with a certified partner for your project.