Starlink Self-Install: From the Box to Being Online
Everything for a basic setup is already in the box — dish, ground stand, router and cable — so there's nothing to drill on day one. This guide walks you through every step, from checking your spot to switching the connection on.
How the Install Works
Scan the sky
Before drilling anything, check your spot with the Starlink app's sky scan — it saves you from moving the dish later.
Test on the ground
Set the dish on its ground stand and run it for a couple of days before deciding on a permanent spot.
Pick a mount
For a permanent install, choose a roof or wall mount — the ground stand is really just a temporary setup.
Cable and activate
Route the cable sloping outward, seal the entry point properly, then activate the connection in the Starlink app.
Why Do It Yourself
Typical speed in Latvia
Starlink in Latvia usually delivers 200–350 Mbps download with 20–60 ms latency — enough for streaming, gaming and remote work.
Everything's in the box
Dish, ground stand, router and cable — the basic setup needs zero drilling to get started.
Check before you drill
The app's sky scan shows if trees or the roofline block your view, before you've made a single hole.
A smart trial run
A couple of days testing on the ground saves time and frustration if the spot turns out wrong.
Sealing that actually holds
Route the cable sloping outward and seal it well — moisture inside a wall is the costliest DIY mistake.
Honest about the limits
A steep roof, a chimney nearby, or lightning protection — that's where it's smarter to call in a professional.
What You'll Need
A few basics from the shop round out what's already in the box.
- A roof or wall mount for the permanent spot
- Weatherproof sealant for the cable entry
- A drill and screwdriver for the mount
- A cable grommet for routing through the wall
- A phone with the Starlink app for the sky scan
Frequently asked questions
Do I need an electrician?
Not for the basic setup on the ground stand — that part is a genuine DIY job.
How long should I test before mounting permanently?
A couple of days on the ground is usually enough to see how the signal holds up in different weather.
What if trees or a neighbouring building block the signal?
The app's sky scan will show that immediately — find another spot before you mount anything for good.
When should I call a professional instead?
Once you're dealing with a steep roof, working near a chimney, or lightning protection — that's beyond DIY.
How does activation and the subscription work?
You activate in the Starlink app with your own account, and the subscription is billed directly by Starlink.
Ready to Start?
Browse mounts, sealant and other essentials for your Starlink install — all in one place at smarteg.lv.